CPU or device information can be
Information can be transferred quickly.
Ver.UP
monitored and changed from the Super
Access Window without using a PC. In
Hardware
Super Access Window and
addition, Expansion Unit status or errors
can be identified by pressing the Direct
Direct Access Switch
Access Switch.
Product List
Software
Device monitoring
CPU
I/O Unit
Analog Unit
I/O
Error display
Analog
Unit monitoring
CPU monitoring
Positioning
Buttons on the CPU Unit can be used to monitor and change Unit settings or status can be checked by pressing the Direct
devices as well as to display device comments or alert Access Switch of Expansion Unit. Unit status can be checked
messages. without using the PLC program.
Communication
Unit information can be displayed by pressing
the Direct Access Switch on the Unit.
Network/Remote
I/O calibration Error message display
NEW NEW
Input Confirmation and Force Output can be enabled through In addition to error code, error details are displayed,allowing
Direct Access Switch and CPU button. I/O calibration can be done any error to be known immediately without referring to the
even without using a program transfer. manual.
Specification
0
1 and
through
2
select the
3
4 device to be ON
5
6 Error unit and errors
7
are displayed
8
to output in the access window.
9
10 * Only I/O unit
13
KV-5000/3000 Quick Start Guide
Positioning Unit
Step.4 Action monitoring
1 Monitor from Access Window
Select "6.CPU Mon" -> "Pos Control".
You can monitor M-Code, number of pulses, speed, or Control Relay from the Access Window.
Access Window
2 Monitor from Custom Monitor
From the workspace, right-click the CPU unit and select "Custom Monitor (C)"
from the menu. From the "Select Custom Monitor" window, select "CPU Positioning
X-Axis Monitor" and click the "View" button. And the Custom Monitor screen is
then displayed.
Reference: 32 above-point positioning
The max number of points being registered for CPU positioning is 32
(including both X-axis and Y-axis).
To position 32 points above, check the "CM Display" tab from the
"CPU Positioning Parameter" window and change the CM details through the ladder.
CPU Positioning Parameter Editor - - Point Parameters
15
CHAPTER TWO Basic Drawing Techniques in VT STUDIO
ADVANCED STYLE SETTINGS
Changing the color of the lamp between ON and OFF
This procedure explains how to change the color of a lamp from green when a machine is
running, to red when it is stopped.
Place a red lamp on the Edit window, then in the In the “Freestyle image selection”
1 2
properties window check “Freestyle” on the [Style] tab window, select an image to show when
and click [Change]. the device is OFF.
The selected file becomes the image
shown when the device is OFF.
Function settings for parts
A laid out part has property settings accessible by single-clicking and functional settings
accessible by double-clicking.
Single Double
click click
Various functional
settings
Properties window
Label, Style
11
VT STUDIO Quick Design Text
CHAPTER TWO Basic Drawing Techniques in VT STUDIO
ADVANCED STYLE SETTINGS
Changing the color of the lamp between ON and OFF
This procedure explains how to change the color of a lamp from green when a machine is
running, to red when it is stopped.
Place a red lamp on the Edit window, then in the In the “Freestyle image selection”
1 2
properties window check “Freestyle” on the [Style] tab window, select an image to show when
and click [Change]. the device is OFF.
The selected file becomes the image
shown when the device is OFF.
Function settings for parts
A laid out part has property settings accessible by single-clicking and functional settings
accessible by double-clicking.
Single Double
click click
Various functional
settings
Properties window
Label, Style
11
VT STUDIO Quick Design Text
KV-5000/3000 Quick Start Guide
Positioning Unit
Easy-to-use hardware, hence simple commissioning!
No PC is required for action checking
Direct
Access Window Access Switch
Press the Switch on the Positioning
Unit to display action status on the
Access Window of CPU Unit! You can
check action status even without a PC
at hand.
Since current coordinate, speed, or execution
point number can be checked, positioning can
be commissioned in a short time. Warning
messages are displayed in English. Warning
can be removed without looking up the manual.
Current coordinate monitoring Execution point monitoring Warning
Easy Wiring!
Less wiring for
the pulse train type
A special terminal block unit and cable are
provided to connect servo drives and stepper
motor drives from other vendors. You don't need
to look up the manual for pin assignment when
wiring and any action can be checked on site.
Less wrong wiring possibility means a quick
commissioning time.
Cable
Cable KV-HC1
KV-HC2
KV-HC3
KV-HC4
2-axis origin sensor,
CW/CCW limit sensor,
stop sensor, emergency
stop inputs
Servo motor
Connector
transformation amplifier Stepper
unit with terminal block motor drive
KV-HTC□
*For more information about corresponding motor drive, please contact us.
2
KV-5000/3000 Quick Start Guide
Logging/Trace
Easy To Use Common means can be used for an easy operation
SD Card
A common SD card is used for logging,
which can be directly read by PC.
Ethernet
When the CPU is running, a client software such as Internet
Explorer can be used for accessing files.
Email
You can transfer logged data by attaching the same to an email.
* Excel and InternetExplorer and their logos are registered trademarks of Microsoft
Corporation in the United States or other respective countries.
Examples of Applications
Application Examples:
■ Running status monitoring during startup
No additional costs are
■ Failure status confirmation
required for data acquisition.
■ Solution to data acquisition requirements
Detection Data Is Acquired Directly by PLC
No external equipment is required for logging data loaded in PLC.
×
This inbuilt feature allows a considerable cost reduction.
■ Manufacturing data logging such as temperature or pressure data
■ Quality checking data logging
■ Serial and batch number logging
×
■ Any PLC device-based timing data logging
Remote Monitoring
A CSV file can be attached to the email after logging.
No special network setting is required in an email-enabled
environment.
Alternatively, the FTP protocol can be used for accessing
stored data.
■ Remote monitoring
■ On-site monitoring
■ Alerting
■ Production monitoring
3
6. 動作環境
ＯＳ：Ｍｉｃｒｏｓｏｆｔ ＷｉｎｄｏｗｓＸＰ/2000
※Windows98/Me,WindowsNT4.0に関しては別途、ご相談ください。
ＣＰＵ：PentiumIII 600MHz以上
メモリ：２５６ＭＢ以上（推奨５１２ＭＢ）
対応データベース：MS-Access/MSDE/SQL Server/Oracle など
67
日本語 英 語 中国語
IT Information Technology
アクセサリ Accessories
アクセス
（する） Access
アクセスポイント Access point
アップグレード
（する） Upgrade
アンインストール
（する） Uninstall
アンチウィルスソフト Anti virus software
インターネット The internet
インターネットカフェ Internet cafe
ウィルス Virus
ＡＤＳＬ Asymmetrical Digital Subscriber Loop
OA Office automation
一般ビジ
OS Operating system
ネス・ お気に入り Favorites
PC用 オンライン取引 Online exchange
語
クリック
（する） Click
ケーブルテレビ Cable television
公式サイト Official site
コンテンツ Contents
再起動
（する） Reboot
システム System
ダブルクリック
（する） Double-clicking
ディスク容量 Disk capacity
電源を入れる Turn on power
電源を切る Turn off power
ブラウザ Browser
添付ファイル Attached file
閉じる Close
ネットワーク Network
ノートパソコン Notebook computer
Ultra-compact Package PLC with a built-in access window providing
PLC with built-
at-a-glance internal data and filled with
in display
practical functions
Visual KV
Series
JUST I/O Performance Specifications
Arithmetic operation control method Stored program method
Well-utilized expansion of 11 types of expansion units I/O control method Refresh method
11 types of 4-, 8-, and 16-point expansion I/O units are available Programming language Ladder chart + expanded ladder method
Basic instruction: 28 types, Application instruction: 22 types,
that can be used from a 10-point basic unit. You can select the Instruction types
Arithmetic instruction: 26 types, Interrupt instruction: 4 types
number of units equivalent to the number of I/O points for 140 µs
Minimum scan time
installation and addition. This achieves low cost and downsizing. 0.7 µs min.
Basic instruction
Instruction
6.4 µs min.
processing time Application instruction
16-point 16-point I/O 8-point I/O 4-point 2,000 steps (KV-10xx KV-16xx)
Program capacity
I/O basic expansion expansion I/O expansion 4,000 steps (KV-24xx KV-40xx)
unit unit unit unit
Maximum number of expansion units 8 (7 for the KV-40xx)
Number of I/O points
10 to 152 points
(including 10 to
(when the maximum number of extension units are installed additionally)
40 I/O points of the
basic unit)
2,560 points: 1000 to 1915, 3000 to 17915
Internal utility relay
Selecting optimum models from abundant models provides 160 points: 2000 to 2915
Special utility relay
a flexible system configuration 2,000 words: DM0000 to DM1999
Data memory (16 bits)
32 words: TM00 to TM31
Temporary data memory (16 bits)
Power
0.1-second timer TMR (0 to 6553.5 seconds)
AC power supply DC power supply
supply type
0.01-second timer TMH (0 to 655.35 seconds)
Relay output Transistor output
Output type 250 points
0.001-second timer TMS (0 to 65.535 seconds)
Timer/counter
UP counter C in total
10 points 16 points 24 points 40 points UP/DOWN counter UDC
6-point input/ 10-point input/ 16-point input/ 24-point input/
Basic unit Digital trimmer 2 points (set in the access window)
4-point output 6-point output 8-point output 16-point output
30 kHz, 2-phase high-speed counter, 2 points (0 to 65535 count)1.
High-speed counter
4 points (2 for each high-speed counter), possible direct output
High-speed counter comparator
4-point input 8-point input 16-point input I/O combination
Expansion 1 independent axis, 50 kHz max.
Positioning control function
4-point input/
unit 4-point output 8-point output 16-point output 16 points
Memory switch
4-point output
Program memory
against power outage
Flash ROM, 100,000 times
Data backup function
Data memory,
counter, internal Data retained for 20 days or more (ambient temperature of 25ºC)
utility relay (the with electrical double-layer capacitor: KV-10AR/AT/DR/DT
device to be Data retained for 2 months or more (ambient temperature of 25ºC)
retained is set by with electrical double-layer capacitor: Other models
the MEMSW Data can be backed up with flash ROM (all models).
instruction)
CPU error, RAM error
Self-diagnosis function
Up to 1,000 device comments can be recorded.
Number of device comments
1. 24 bits can be set.
Panel-mounting “Panel PLC” where the PLC and
PLC with built-in
operation box come together
display
KV-P Series
Amazingly user-friendly and easy to view on site
Unlike conventional operation boxes, the KV-P Series does not require layout and processing of switches and lamps. Related wiring also
becomes unnecessary. This achieves a drastic reduction in man-hours for labor. The KV-P Series can cater to a wide variety of applications
such as alarm display, device status display, and work instructions. This makes it possible to achieve a level of usability and viewability that is
hard to imagine.
[Conventional operation box] [KV-P Series]
Data access panel
The data access panel allows you to
access internal devices in the PLC. For
this reason, for example, the internal
counter and timer in the PLC can
substitute for the conventional timers
and counters.
* The data access panel can also serve as the
message panel.
(Up to 128 pages can be set.)
Message panel
The message panel can display messages freely. For example, it can display work
instructions, device status, and alarm messages. In this panel, you can also create
several variable switches by using function switches F1 to F5.
35
* The message panel can also serve as the data access panel. (Up to 128 pages can be set.)
はじめに
Microsoft Excel を使ってバーコードを作成する方法についてご説明いたします。
Access に搭載されている
バーコード作成するためのツールとしましては、 「バーコードコントロー
ル」を使用します。
この手引きでは、この「バーコードコントロール」を Excel で使用する方法を説明します。
使用環境について
・対応しているバージョンは、Excel2000, Excel2002, Excel2003 です。
・同じ PC に Access もインストールされている必要があります。
Excel を使ってバーコードを出力する方法
※Excel2000 を例にご説明します。
①Excel を起動します。
②[表示]-[ツールバー]を選択して「コントロールツールボックス」にチェックを入れてください。
「コントロールツールボックス」に
チェックを入れてください。
2
翻訳キーワード集
